This is an old revision of the document!

---

<code cpp> /******************************************************** * Code to access the raw data coming from teh I2C thermo * pile array and dispay it on the console. * By: Jonathan Mash * Date: Feb. 2009 *********************************************************/ #include <Wire.h> #define NUM_SENSORS 30 byte sensor_address = { 0xd0}; void setup() { Wire.begin(); // join i2c bus (address optional for master) Serial.begin(9600); // start serial for output Serial.print("Starting TPA81 bus\n"); } void loop() { byte b, s; int i; for (i=0; i<=9; i++) { Wire.beginTransmission(sensor_address>>1); Wire.send(i); Wire.endTransmission(); Wire.requestFrom(sensor_address>>1, (int) 1); while(Wire.available() < 1) { ; } b = Wire.receive(); // receive a byte as character Serial.print(b, DEC); Serial.print(" "); delay(10); } Serial.println(""); delay(500); } </code>

Back to top