pic_controlled_stepper_motor [Smart TV Project]

This is an old revision of the document!

A PCRE internal error occured. This might be caused by a faulty plugin

====== PIC Controlled Stepper motor ====== Code to send data to the PIC: <code cpp> void setup() { pinMode(3, OUTPUT); // sets the digital pin as output } void loop() { digitalWrite(3, HIGH); delayMicroseconds(2000); digitalWrite(3, LOW); delay(100); } </code>

pic_controlled_stepper_motor.1235801848.txt.gz · Last modified: 2009/02/28 06:17 by jonmash

Back to top